A magnetic flow meter at Instronline

Home
»
Blog
»
A magnetic flow meter

Discussion Forum

A magnetic flow meter

Listed on Nov 15,2017

By Admin

A magnetic Flow meter (magazine go with the flow meter) is a volumetric go with the flow meter which does now not have any shifting elements and is good for wastewater programs or any dirty liquid that's conductive or water based. Magnetic glide meters will usually now not paintings with hydrocarbons, distilled water and lots of non-aqueous answers). Magnetic flowmeters also are best for packages where low strain drop and low preservation are required.

Working Principle of Magnetic Flow Meter:-
Faraday’s law the operation of a magnetic flow meter or magazine meter is based upon Faraday's regulation, which states that the voltage brought about throughout any conductor as it moves at proper angles via a magnetic subject is proportional to the rate of that conductor.
to use this principle to waft dimension with a magnetic flow meter, it's miles essential first to the kingdom that the fluid being measured need to be electrically conductive for the Faraday principle to use.

Magmeter Selection Process:-
The key Point which needs to be answered before selecting a magnetic flow meter are:
1. Is the fluid conductive or water based?
2. Is the fluid or slurry abrasive?
3. Do you require an integral display or remote display?

Insertion Magmeter:-
Insertion type meters supplied with the aid of Omega Engineering have a well-known 2" NPT or suit into a particular size fitting. The FMG-550 collection is designed for 2" to forty-eight" in length with a floating price of zero.05 to ten m/sec (0.15 to 33 toes/sec). The FMG-550 collection gives an analog output with a quintessential show for float fee and tantalization. The FMG3000 collection offers corrosion resistant materials for pipes from zero.5 to 8". These insertion type flow meters are best for massive pipe packages.

Installation Considerations:-
Select a place for the sensor in which the drift profile is absolutely advanced and now not laid low with any disturbances. a minimum of 10 pipe diameters of heterosexual run upstream and 5 diameters downstream is recommended. Some conditions may additionally require 20 pipe diameters or greater upstream to ensure a completely evolved turbulent glide profile. The insertion Magmeter is sensitive to air bubbles on the electrodes. If there may be any query that the pipe is absolutely complete, mount the sensor at a 45 to a hundred thirty-five attitude.

Grounding requirements:-
Magnetic flow sensors are sensitive to electrical noise which is present in most piping systems. In the plastic piping systems, the fluid carries significant levels of static electricity that must be grounded for best Magmeter performance.Instructions are included with the installation manual on how to best ground the magnetic flow meter. If you are trying to find out best Low price electromagnetic flow meter Dealers, Siemens Electromagnetic flow meter Suppliers In Delhi NCR, Best Price Electromagnetic Flowmeters which is very cost effective.

In-Line Magmeter:-
The in-line type magnetic flow meters offer a higher accuracy. They can have accurate to 0.5% of the flow rate. The insertion styles offer a 0.5 to 1% accuracy. Omega's FMG-600 series line flange and wafer style meters offer higher flow rates of 1 to 10 m/sec. These inline meters are offered in pipe sizes up to 12".

Installation Considerations:-
In line flow meters do not require a great deal immediately pipe because of the insertion patterns. at the least, 5 to ten pipe diameters of straight run upstream and 1 to two diameters downstream is recommended. In vertical pipe runs, the flow has to continually run up and now not down. these go with the flow meters are very touchy to air bubbles. The magmeter cannot distinguish entrained air from the manner fluid; consequently, air bubbles will cause the Magmeter to read excessively.

Low Flow Magmeter:-
These low flow mag glide meters also are in line and offer three/8" to ½" NPT connections. The FMG200 collection provides glide quotes right down to 0.38 LPM (.1 GPM). A digital display with relay and analog outputs are fashionable. For decades sensors utilized in excessive reliability applications, consisting of the ones utilized in aerospace and military applications, relied upon connectors including the Mil-C-5015 or MIL-C-38999 connectors that supplied excessive reliability and cozy connections but at an excessive price. With the accelerated use of business automation structures, however, the quantity of sensors used have expanded dramatically, using the need for a reliable, value effective connection machine for those sensors.

Shop for Magnetic Flow Meters in India:-
The Instronline portal handles all inquiries and we’ve utility Engineers and Sale assist personnel equipped to assist you along with your technical questions, quotations, sand orders. A one-stop supply for system size and manage, Instronline presents guide thru internet chat, and email and Smartphone there are exceptional.
Pressure Transmitter Suppliers, Pressure Transmitter Exporters which will help you to choose right products.

LEAVE YOUR COMMENTS

Name

Website Url