Applications
Calibration service companies/service industry
Quality assurance
Recording and monitoring of pressure processes
Measurement of pressure peaks
Special Features
Recording interval can be set from 1 ms ... 10 s
Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14.500 psi)
Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
No external voltage supply required
Software for recording of measured values, calibration and evaluation
Description
Extensive application possibilities
The CPT2500 USB pressure transmitter is suitable for connection to any PC with a USB port, via the CPA2500 USB adapter.
For the USB adapter there are stainless steel pressure transmitters available with measuring ranges up to 1,000 bar. The USB adapter automatically detects the measuring range of the currently connected pressure transmitter and ensures a highly accurate pressure measurement.
Functionality
The measurement interval for pressure recording can be set in the range of 1 ms ... 10 s. With a recording interval of more than 5 ms the following data is recorded in addition to the current measured value:
the mean value over the recording interval
the maximum and minimum value during the recording interval
Thus pressure peaks within the overall recording interval can be very easily identified.
It is also possible to set start and stop conditions for the recording. In this way it is possible to detect pressure peaks with a resolution of up to 1 ms.
The CPT2500 is a thus very well suited to all applications where, over a limited time span, pressure processes must be recorded and analysed with high resolution.
Software
The USBsoft2500 and USB ScanSoft software are delivered as standard with the USB adapter. With it, all settings for recording the pressure process can be made. The recorded measured values can be graphically displayed and evaluated.
In addition to the USBsoft2500 and USB ScanSoft software, WIKA-CAL calibration software for calibration tasks is also available. Using this software, the data is automatically transferred into a printable calibration certificate.
Furthermore, WIKA-CAL also offers, over and above PC-supported calibration, the management of the calibration and instrument data in an SQL database. For data transfer, a USB interface is available.
LEAVE YOUR COMMENTS