Calibration Instrument (24 Products Listed)

MIDLAND MIDLAND ACS OPD SILSAVE SYSTEM - OVER PRESSURISATION DEVICE STEMSAVER
The purpose of the OPD Silsave system is to serve as a preventative pressure sensitive device, designed to prevent the downstream system receiving an unscheduled increase in supply pressure thus causi...
MIDLAND
Bauer Gear Motor HiflexDRIVE - Stainless Steel
The combination of the BK17 range and permanent magnet synchronous motors (PMSM) means not only that the PMSM design is superior at converting electrical energy into mechanical power, it also offers t...
Bauer Gear Motor
Bauer Gear Motor EtaK2.0: Decentral Inverter Solution
The EtaK2.0 features maximum user friendliness in operation and installation. Especially for decentralised drive solutions, it demonstrates its high efficiency in terms of space, time and energy. ...
Bauer Gear Motor
Wika Hand-held temperature calibrator
The model CEP3000 hand-held temperature calibrator is an ideal instrument to handle all your temperature calibration tasks in a rugged, inexpensive package. It combines virtually all widely-used therm...
Wika
Wika Precision Loop Calibrator
The Precision Loop Calibrator CEP1000 provides significantly extended performance when compared to any competitive calibrator. With an accuracy of 0.015 % of reading, with 0.001 mA resolution, the CEP...
Wika
Wika USB pressure transmitter
Extensive application possibilities The CPT2500 USB pressure transmitter is suitable for connection to any PC with a USB port, via the CPA2500 USB adapter. For the USB adapter there are stainless stee...
Wika
Wika Hand-held pressure indicator
Extensive application possibilities Stainless steel pressure sensors with measuring ranges up to 1,000 bar are available for the model CPH6300 hand-held pressure indicator. The robust and waterproof d...
Wika
Wika Hydraulic comparison test pump
Test pumps serve as pressure generators for the testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. These units can be use...
Wika
Wika Test pump, pneumatic
Areas of application Test pumps are used in generating pressure for the testing, adjusting and calibrating of mechanical and electronic pressure measuring instruments by means of comparative measureme...
Wika
Rotork YTC Rotork YT-700D Series 4 Way Type Explosion Proof Solenoid Valve
Explosion proof type 4way solenoid valve, Rotork YT-700D series outputs pressure to valves or changes output port direction. - Explosion proof type (ExdIICT6) solenoid valve. - Replacement of coil i...
Rotork YTC
Rotork YTC Rotork YT-700S Series Explosion Proof 3 Way Type Solenoid Valve
Explosion proof type 3way solenoid valve, Rotork YT-700S series outputs pressure to valves or changes output port direction. - Explosion proof type (ExdIICT6) solenoid valve. - Replacement of coil i...
Rotork YTC
Rotork YTC Rotork TMP-3000 Series Electro Pneumatic Smart Valve Positioner for Valve Stroke Control
Rotork TMP-3000 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4-20mA, which is being input from the controller. In addition, built-in micro-processing operator ...
Rotork YTC
Rotork YTC Rotork YT-2701 Series Electro Pneumatic Smart Valve Positioner for Valve Stroke Control
Rotork YT-2701 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4-20mA, which is being input from the controller. In addition, built-in micro-processing operator o...
Rotork YTC
Rotork YTC Rotork YT-2700 Series Electro Pneumatic Smart Valve Positioner for Valve Stroke Control
Rotork YT-2700 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4-20mA, which is being input from the controller. In addition, built-in micro-processing operator o...
Rotork YTC
Rotork YTC Rotork YT-2501 Series Electro Pneumatic Smart Valve Positioner for Valve Stroke Control
Rotork YT-2501 Smart positioner supplies remote functions and higher liabilities in high temperature and vibration environment. YT-2501 Smart Valve Positioner accurately controls valve stroke, accordi...
Rotork YTC
Rotork YTC Rotork YT-2500, Rotork YT-2550 Series Electro Pneumatic Smart Valve Positioner for Valve Stroke Control
Rotork YT-2500 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4-20mA, which is being input from the controller. In addition, built-in micro-processing operator o...
Rotork YTC
Rotork YTC Rotork YT-3400, Rotork YT-3450 Series Electro Pneumatic Smart Valve Positioner for Valve Stroke Control
Rotork YT-3400(Rotork YT-3450) Smart Valve Positioner accurately controls valve stroke, according to input signal of 4-20mA, which is being input from the controller. In addition, built-in micro-proce...
Rotork YTC
Rotork YTC Rotork YT-3301 Series Electro Pneumatic Smart Valve Positioner for Valve Stroke Control
Rotork YT-3301 Smart positioner supplies remote functions and higher liabilities in high temperature and vibration environment. Smart Valve Positioner accurately controls valve stroke, according to i...
Rotork YTC
Rotork YTC Rotork YT-3303 Series Electro Pneumatic Smart Valve Positioner for Valve Stroke Control
Rotork YT-3303 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4-20mA, which is being input from the controller. In addition, built-in micro-processing operator o...
Rotork YTC
Rotork YTC Rotork YT-1200R Series Pneumatic Positioner for Pneumatic Valve Actuators
The Pneumatic Pneumatic Positioner Rotork YT-1200 series are used for pneumatic valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 5 psi or split ranges.
Rotork YTC
Rotork YTC Rotork YT-1200L Series Pneumatic Positioner for Pneumatic Valve Actuators
The Pneumatic Pneumatic Positioner Rotork YT-1200 series are used for pneumatic valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 5 psi or split ranges.
Rotork YTC
Rotork YTC Rotork YT-1050 Series Electro Pneumatic Positioner for Pneumatic Valve Actuators
Rotork YT-1050, the Electro Pneumatic positioner is used for operation of pneumatic valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or ...
Rotork YTC
Rotork YTC Rotork YT 1000L Series Electro Pneumatic Positioner for Pneumatic Valve Actuators
Rotork YT-1000L Electro Pneumatic positioner is used for operation of pneumatic valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or spli...
Rotork YTC
ABUSTEK LPI - T
The ABUS LPI-T Loop Powered Indicator for Temperature Transmitter is a microprocessor controlled loop powered display for any 4 ~ 20 mA standard signal. It does not require its own separate voltage so...
ABUSTEK

 

 
© Copyright 2016. All rights reserved. Instronline
×
How may we help you ?
Name*
Mobile No.
Email*
Message